Features:

- AIO Flight controller with Serial ELRS Receiver

- Compatible with HDZERO system

- Equipment with the lightest brushless motors-SE0702 only 1.49gram

- HDZERO NEW ECO VTX and Camera ready

- Smooth and powerful

- Compatible for 1S Lipo/LIHV

- Onboard blackbox ready

Specifications:

Brand Name: HAPPYMODEL & HDZERO CO-Brand

Model: Mobula6 ECO 2024

Frame wheelbase: 65mm

Weight: 23.16g ( without battery)

Size: 81mm*81mm*45mm

Compatible with 1S Lipo battery or Lihv battery

Battery Plug: GNB A30

Motor

Mode: SE0702 KV28000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.49g
No.of Cells(Lipo):1S only

Propellers

Materials: PC

Inch: 31mm

Pitch: 0.8 in

Weight: 0.21g

Mount hole diameter: 1mm

Flight controller SuperX HD ELRS

Betaflight 4.4.2 firmware ready

Firmware target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: BMI270 or ICM42688P (SPI connection)
Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone
Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read

Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update

Bluejay ESC Firmware ready
Built-in 5V 1A BEC
Built-in voltage detection

No betaflight analog osd chip

Onboard 4in1 ESC
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support ESC-Configurator and BLHELI_S Suite configurator
Factory firmware: Z-H-30 - Bluejay, 0.19, 48kHz
Default protocol: DSHOT300

Onboard Serial ExpressLRS 2.4GHz Receiver
RF Frequency: 2.4GHz
Antenna: enameled copper wire 31mm length
Telemetry output Power: <12dBm
Receiver protocol: CRSF
Default firmware version: ExpressLRS V3.0.1
The same hardware with Happymodel EP1 receiver
Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through

HDZERO ECO VTX
Composite HD Video interface
1S-3S Input
25mW/200mW RF output
25.5x25.2 M2 soft mounting
Antenna Retention
32.4x32.5mm (29x29mm inner)
4.5grames/4mm Thickness (w/o shielding)

HDZERO ECO Camera
Image Sensor 1/3”
Resolution: 720@60fps 4:3
LENS: FOV D:150° H:120° V:98°
Shutter: Rolling Shutter
Net Weight: 1.6g (With Cable)
Dimensions: L14mm*W14mm*H13mm

Package Included:

1X Mobula6 2024 1S 65mm whoop Drone Frame +Canopy
1X SuperX HD ELRS AIO flight controller
1X SE0702 KV28000 brushless motor
1X Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw)
1X HDZero ECO VTX
1X HDZero ECO Camera
1X Spare Canopy
1X Propeller disassemble tool
1X Screw driver